Skip to content
fontkind.

Capital letter · 11 of 26

Bubble letter K

Bubble K is a straight back with two fat arms that meet it at the middle, one reaching up to the right and one kicking down.

K
Bubble letter K in Modak, on lines at the font’s cap height, x-height, baseline and descender
The font
Modak. Round, puffed up. Free to use, from the catalogue.
Step by step
  1. 1Sketch a line down, and two slants that meet it halfway, one rising and one falling.
  2. 2Wrap the back and both arms in one even outline with rounded arm ends.
  3. 3Keep a round-ended V of white where the arms part, and both gaps between arms and back open.
  4. 4Add shadow beneath the upper arm and along the lower arm’s outer edge, with shine where the back begins.
Watch for
Fat arms fill the space between them, and the K turns into a wedge. Start the two slants from one point on the back, not from two.
Mixed up with

Join the upper arm to the stem in a loop and a bubble K becomes an R; cross the arms over the back and it is an X.

Practise with
Kind · King · Kai · Kick

Print a sheet for K →Lowercase k

01 / In other fonts

K in 4 more fonts

Modak draws the widest K for its height and Bagel Fat One the narrowest.

02 / To colour in

A page to colour

On US Letter the sheet prints the K 133 mm tall and 125 mm wide, 5.2 by 4.9 inches, with about 138 cm² to colour; on A4, 129 by 121 mm. The alphabet sheets print A to Z or your own name.

One page: the K big and hollow in Modak to colour in, and the same K in the other fonts under it. Crayons, markers or paint; or trace it.

Paper

In the print dialog choose Save as PDF to keep a file. The sheet fills one page of US Letter at full size.

Preview · 1 page · Modak

03 / Questions

Bubble K, answered

A 3D bubble letter is its outline drawn twice, the copy a little down and to the right, the corners joined.

Where does the depth go on a 3D bubble K?

The depth of a K shows under its upper arm, inside the notch, along the right of the lower arm and below its tip.

Where do the two arms of a bubble K join the back?

At one point, just above the middle. Meeting lower, the upper arm gets too long and the K leans back.

How do you colour a bubble K?

Colour the back first, then each arm in a stroke going outwards from the joint; the notch is narrow, so finish it with a fine tip.